Wren | Actions

Energy Impact

Heating & cooling is usually the highest source of energy in your home. Since ordinary heaters — aka your furnace or boiler — burn fossil fuels, it is incredibly important to electrify them in order to reduce reliance on fossil fuels and transition to a sustainable society.

Enter the heat pump, a clean, electrical alternative that can heat, cool, and control humidity for your home. When combined with a renewable energy source, it’s completely sustainable.

Heat pumps can be expensive, but since they are more efficient they will save you money in the long run.

How does a heat pump work?

A heat pump does not use as much energy as other units because it simply moves warm air around rather than producing heat. While many electric heaters convert the electricity that powers them directly into heat, an electric heat pump doesn’t work in this way. Instead, it draws in heat from the air, or from the ground around your home, and uses that to warm your home. And it cools by pulling the warm air out of your home, rather than using energy to cool air from outside.

Top Pick

American Standard

This air-source heat pump is a solid option with great energy efficiency and low noise output. American Standard & Trane shared highest ratings for reliability and owner satisfaction in a Consumer Reports survey to 12,400 heat pump owners. This system can be paired with your gas furnace to create a hybrid system. That way you can reduce reliance on natural gas while still being able to use the furnace as an auxiliary system once your heat pump reaches capacity. Stats: Energy Star Qualified, 17 SEER, 9.6 HSPF.

American Standard's package includes a $300 rebate:

Get a quote from a local American Standard dealer

Other picks

Bryant & Carrier

Bryant and Carrier followed close behind on reliability and owner satisfaction scores.

More about heat pumps

Types of heat pumps

Air source

• The most common type of heat pump. Appropriate for warm climates and viable for cool climates (temperatures drop below 10°F) with an auxiliary heating system.
• Will reduce your heating costs by about 50% over electric furnaces and baseboard heaters.
• Average cost: $3,500-$7,500

Split-ductless

• These systems don't require ductwork, so they're best for a single room, a small home, or if your home doesn't have ducts.
• If you have a larger home, installing a split-ductless across your whole home can be more expensive than air-source heat pumps.
• Average installation costs: $1,500-$5,000

Geothermal (GHP)

• Unlike air-source systems, ground-source heat pumps draw heat and cold from the ground. Unlike air temperatures which fluctuate drastically based on the season, ground temperatures remain relatively stable, between 50-60°F from summer through winter. Having a steady temperature to rely on during extreme weather makes GHPs a better option for very cold climates.
• The installation costs can be several times that of air-source systems, but the system's lifespan is 25 years, compared to 10 years.
• Average installation cost: $13,000-$36,000

Making sense of the energy efficiency ratings

For air-source & ductless-split heat pumps:

• SEER: Seasonal Energy Efficiency Ratio (only applies to air-source & ductless-split) measures cooling efficiency.
• HSPF: Heating Seasonal Performance Factor is the converse of SEER. Minimum HSPF rating is 7.7.
• Putting it all together: In warm climates, high SEER is important, but in cold climates, prioritize HSPF. Energy Star-rated heat pumps start at 18 SEER and 12.5 HSPF.

For geothermal heat pumps:

• EER: Energy Efficiency Ratio for cooling efficiency. For cold climates, 17.1 is the federal minimum.
• COP: Coefficient of Performance for heating efficiency. Shoot for anything above 4.1 in cold climates.

What to consider before buying:

• When should you switch to a heat pump?
• If your furnace or boiler is more than 15 years old, consider replacing your heating system with a heat pump.
• Do you live in the right environment for a heat pump? Because a heat pump works by drawing in surrounding warm or cool air to regulate your home temperature, it works best in moderate climates.
• If you live in an extreme climate, consider a geothermal heat pump — though installation can be 4-5 times more expensive than traditional air-source systems.

What heat pump size should you get?

• Hire an HVAC contractor to do a consultation. The calculation for heat pump size will take into account your home's foundation, wall thickness, insulation values, air filtration, etc. Your contractor should use a chart that looks like this.
• As a rough estimate, for 500-600 square feet of conditioned floor area, install one tonne of air conditioning capacity. An average sized American house would probably need a 3-tonne heat pump.

Is your home insulated & efficient enough to guarantee high performance and savings?

• Doing a home energy audit could save you hundreds by making your home more efficient and getting a smaller heat pump.

Do you qualify for any tax credits or rebates to help reduce the upfront cost?

• Use EnergyStar or visit the Database of State Incentives for Renewables & Efficiency for a state-by-state list of available incentives.

Are your potential long-term savings enough to make the upfront cost worth it?

• If you use an average amount of natural gas to heat and cool your home, a heat pump could save you around $100 per year.
• Calculate your potential savings using this heat pump calculator.

For a glossary on heat pump terms, check out this page from a heat pump provider.